Patched 10x10cm Hole in Drywall in Flat Bush

Summary

Patching a 10x10cm hole in the wall in Flat Bush required a focused drywall repair. The customer asked for the work to use an off-cut of gib board with timber backing and a plaster sanding finish. The hole had ragged edges, some peeling wall material and a red tack visible above the opening. Only one offer was received and the selected offer was $150. The job was completed within 2 hours of being assigned. The handyman trimmed the ragged edges, fixed a gib off-cut with timber reinforcement and completed the surface with plaster sanding to blend the patch with the surrounding wall. The customer rated the completed task 5/5. The repaired area was left prepared for any further finishing or painting as required.