Summary

The customer needed a new F&P dryer mounted on the wall and connected to their existing vent in Kelburn, Wellington. The job required removing an old wall bracket, fitting the new wall‑mounted brackets supplied with the dryer and then hanging the appliance. A key challenge was that modern dryers don’t use the original bracket system; one offer noted they would need help to lift the dryer after installation, and another offered to do the work on Saturday. Two offers were received, and the selected offer was $80. Work proceeded by first carefully removing the existing bracket and preparing the wall for the supplied mounting kit. The new brackets were installed, the dryer was hung and the vent was reconnected and sealed. The agreed outcome was achieved, and the customer left a five‑star review praising prompt communication and that the job was completed quickly and efficiently.